LED Drywall Profile with Spatula Flanges – 2m Aluminum Recessed Profile for Gypsum Board

• Seamless integration: Plastered directly into the drywall or ceiling and disappear invisibly into the architecture.
• Minimalist design: Only the light itself is visible (light cove or light line)
• Structural: Enable the creation of architectural lighting effects such as shadow gaps and floating ceilings.
• High stability: The profiles are firmly bonded to the building fabric by plastering.
• Heat dissipation: Serve as an effective heat sink for the LED strips, extending their lifespan.
• Protection: Protect the LED strips from dust, moisture, and mechanical damage.

• Minimalist lines of light: Creation of continuous, seamless light strips in drywall walls and ceilings (only the illuminated surface remains visible after plastering).
• Decorative accents: Use as subtle, flush-mounted lighting in niches or wall projections.

• 1x LED drywall profile with feather edges (2m)
• 1x cover
• 2x end caps

Note: LED strips are not included and must be purchased separately.

1. Installation Instructions:
• Mounting: Screw the profile securely to the substructure or drywall.
• Filling: Completely cover the perforated filling tabs/wings with drywall joint compound.
• Seamless Finish: Apply the compound in several layers, smooth it out, and allow it to dry.
• Painting: After drying, sand, prime, and paint.
• Final Assembly: Install the LED strip and cover only after all painting work is complete.

2. General Safety Instructions:
• Turn off Power: Always switch off the circuit breaker before starting any work (sawing, gluing, connecting).
• Protective Clothing: Always wear safety goggles and gloves when sawing profiles.
• Wet Rooms: Use only IP-certified (moisture-protected) LED strips.
• Heat: Aluminum profiles are used for cooling; heat dissipation must not be obstructed.
• Electrician: Leave installations over 50V or complex circuits to a qualified electrician.