5V SK6812 Addressable RGBW LED Strip – Individually Controllable

• Individually addressable RGBW LEDs:
Each LED can be controlled individually – perfect for smooth color gradients, animations, and finely controlled scene effects.
• Additional white channel:
In addition to RGB colors, the strip offers true white (warm, neutral, or cold white) for a more natural lighting effect and nuanced brightness.
• Compact 5V system:
Particularly suitable for microcontroller and DIY projects with low operating voltage.
• Flexible options:
Available with 30, 60, or 144 LEDs per meter – for coarse, medium, or high-resolution effects.
• Selectable color temperature:
Warm white (2700–3000 K), neutral white (4000–4500 K), or cold white (6000–6500 K) – for the right lighting mood depending on the application.
• Protection rating as required:
IP30 for dry indoor spaces, IP65 with silicone potting, or IP67 with silicone tubing for more demanding applications.

• Dynamic RGBW lighting in living and workspaces
• Ambilight, gaming or desktop setups with color scenes and white light components
• Backlighting for furniture, displays or illuminated signs
• Custom lighting animations for events, exhibitions and trade show booths
• Smart home projects with addressable lighting and variable color temperatures

• 1 × LED strip
• 1 × connector (JST plug)

• Observe the data flow direction:
The data direction is indicated by an arrow on the strip. The controller must always be connected to the data input (DIN). Connecting it in the wrong direction will prevent it from working.
• Reverse polarity protection:
Make sure to observe the correct polarity – +V, GND, and DATA (or CLK in 2-wire systems).
Incorrect polarity can irreparably damage the LED strip or controller.
If present, pay attention to the markings on the strip or at the connection.
• Power supply according to the LED type:
- 5V strips (e.g., WS2812B, SK6812) require exactly 5V
- 12V strips (e.g., WS2815) are more tolerant regarding length, but have higher power consumption
- 24V strips (e.g., TM1814, COB models) for longer distances with less voltage drop
Important: Always use a suitable power supply (voltage + sufficient power in watts/amperes).
• Size the power supply:
Calculate power consumption depending on the number of LEDs, voltage, and brightness.
Always plan for approx. 10% power reserve for the power supply.
• Observe the maximum length per power feed:
Control and voltage quality decrease as the length increases.
Guidelines for single-sided power feed:
5V: max. 3-4m
12V: max. 5-8m
24V: up to 10m
For longer distances:
→ plan for double-sided power feed or additional power feed points
• Signal amplification for long distances:
From approx. 5m or with several LED strips in series, a signal repeater or data booster may be necessary to ensure clean data transmission.
• Keep signal and power lines short:
Use cables that are as short as possible and sufficiently sized to avoid voltage drops and data interference.
• Do not forget the GND connection:
Even with separate power supplies or long data lines, the ground connection (GND) must always be continuously connected – otherwise, data errors will occur.
• Control via compatible controllers:
Operate only with SPI- or PWM-capable controllers (e.g., WLED, Pixel Controller, DMX-SPI Decoder, Arduino, ESP32, etc.) – depending on the LED IC used.
• Test before final installation:
First check the strip at full length (voltage, data, colors, IC function) – only then attach it. For protection ratings IP65/IP67, check for tightness beforehand.
• Consider heat generation:
COB strips and high-power models can get warm. Mounting on heat-conductive surfaces (e.g., aluminum profile) is recommended.