48V COB LED Strip Constant Current 10W/m 480 LEDs/m 30m, single-sided power supply up to 30m

48V COB LED Strip Constant Current 10W/m, 480 LEDs/m, 30m Continuous

This COB LED strip was specially developed for particularly long lines of light. Thanks to the 48V operating voltage and integrated constant current (CC) technology, the strip can be operated at its full length of 30m with only a single-sided power supply. Brightness and light color remain uniform from start to finish, without any visible drop in brightness due to voltage loss. Additional power supply points or parallel wiring are eliminated, which significantly simplifies installation over long distances.

With 480 LEDs per meter, the strip produces a continuous, dot-free band of light in warm white 3000K with a color rendering index of Ra90. The tight color tolerance (SDCM <3) ensures a uniform light color over the entire length.

Technical Details:

• Light source: COB chips
• Input voltage: DC48V
• Operating mode: Constant current (CC)
• Power: 10W/m (300W at 30m)
• Luminous flux: 870 lm/m
• Luminous efficacy: 87 lm/W
• Light color: Warm white 3000K
• Color rendering index (CRI): Ra ≥90
• Color consistency: SDCM <3
• Number of LEDs/m: 480
• Beam angle: 180°
• Length: 30m
• Max. length with single-sided power supply: 30m
• Cuttable: every 50mm at the cut marks
• PCB width: 10mm
• Height: 1.8mm
• Connection cable: 15cm at both ends, 18AWG (Red +, Black −)
• Dimmable: Yes, via PWM
• Protection rating: IP20
• Mounting: Self-adhesive tape
• Service life: 50,000 hours
• Operating temperature: -25°C to +45°C

Features:

• 30m with a single power supply: The constant current technology compensates for voltage drop, so the brightness remains constant over the entire length.
• Dot-free light: 480 COB LEDs per meter produce a homogeneous band of light without visible light dots.
• High light quality: Ra90 and SDCM <3 for natural color rendering and uniform light color.
• Ready to connect: 15cm connection cable at both ends.
• Flexibly cuttable: Separable every 50mm at the marked cut points.

Applications:

Ideal for long, continuous lines of light in architecture and building construction, e.g. in hallways, stairwells, shop fitting, offices, hotels, ceiling coves, facade niches in protected areas as well as cove lighting in large rooms.

Scope of delivery:

• 1x 30m COB LED strip 48V with connection cable at both ends

Notes:

• Power supply: Operation on a 48V DC constant voltage power supply. For 30m, a power of at least 300W is required; we recommend approx. 20% power reserve.
• Dimming: The output frequency of the PWM dimmer should be below 2kHz.
• Connectors: Clamp connectors are rated up to max. 4A. At full length (approx. 6.25A), perform the power supply via the soldered connection cable.
• Installation: Observe polarity. Only bend the strip, do not twist or kink it (min. bending radius approx. 5mm). Prepare the mounting surface clean, dry, and free of grease.

The 48V COB Long Run strip is the right choice when long lines of light with uniform brightness and minimal wiring effort are required.