2m aluminum LED profile with smooth surface

✔ Low-profile aluminum LED profile with a height of just 6 mm
Smooth surface for a clean, modern look
✔ Suitable for LED strips up to 10 mm wide
✔ Anodized aluminum in a silver finish
✔ Opal cover for softer light distribution
✔ Reduces visible LED hotspots
✔ Ideal for discreet surface-mounted installations
✔ Includes end caps and brackets for a clean installation

• Subtle LED light lines for interior spaces
• Furniture lighting for shelves, cabinets, or display cases
• Under-cabinet kitchen lighting
• Indirect lighting in niches or wall areas
• Accent lighting in living, office, or retail spaces
• Exposed installation with a sleek, smooth surface
• Protected installation for LED strips up to 10 mm wide

• 1 × aluminum LED profile, 2 m
• 1 × diffuser
• 2 × end caps
• 4 × mounting brackets

1. Installation Instructions:
• Prepare the mounting surface
The surface should be clean, dry, level, and load-bearing.
• Cut the profile if necessary
The aluminum profile can be cut to the desired length. After cutting, the cut edges should be deburred so that the cover and end caps fit neatly.
• Attach the brackets
The included brackets are screwed into the desired position. Make sure they are aligned straight.
• Insert the profile
The profile is inserted into the mounted brackets and securely fixed.
• Glue in the LED strip
Glue the LED strip into the profile centered and straight. The LED strip used must be a maximum of 10 mm wide.
• Test the function
Before final sealing, check if the LED strip is working correctly.
• Mount the cover and end caps
Insert the opal cover and then mount the end caps for a clean finish.

Important note:
The profile is suitable for LED strips up to 10 mm wide. For a particularly homogeneous line of light, LED strips with a high LED density or COB LED strips are recommended.

2. General safety instructions:
• Turn off the power: Always switch off the circuit breaker before starting work (sawing, gluing, connecting).
• Protective clothing: Always wear safety glasses and gloves when sawing profiles.
• Wet rooms: Only use IP-certified (moisture-protected) LED strips.
• Heat: Aluminum profiles serve for cooling; heat dissipation must not be obstructed.
• Electrician: Leave installations over 50V or complex circuits to a qualified electrician.