2 in 1 dimmable RF LED power supply 40W 12/24V

600507
€27,90
€27,90
Tax included. Shipping calculated at checkout.

Technical specifications

Output voltage
  • 12 V DC
  • 24 V DC

Performance
  • 40W

Output current
  • 3.33A
  • 1.67A

Efficiency
  • >85%

Protection Features

Overload, overtemperature and short-circuit protection

Dimmable

Yes

Connection
  • Screw terminals

Protection rating
  • IP20

Material

Plastic

Warranty

5 years

Dimensions

Length
  • 151.5mm

Width
  • 45mm

Height
  • 23.5mm

Advantages

• 2.4 GHz RF remote control + push-dimming in one device
• Flicker-free dimming from 0.1 to 100%
• High PWM frequency (4000 Hz) for particularly pleasant light
• PF ≥0.95 for energy-efficient operation
• THD <10%
• Standby power consumption <0.5 W
• Overheating, overload and short-circuit protection
• Dimm-memory in the event of a power failure
• Synchronization of multiple power supplies possible
• 5-year warranty
• CE, ENEC, TÜV, CB, RoHS, UKCA & ERP certified

Scope of application

• Solid-color LEDs for indoor use
• Indirect lighting in living spaces, furniture or ceiling profiles
• Hotel, retail and shop lighting
• Wall washers and decorative accent lighting
• Panel lights for office and commercial applications
• Modernization of existing push-dim installations
• RF radio control for convenient wireless lighting control

Scope of delivery

• 1× 40W RF dimmable LED power supply (12V or 24V depending on selection)
• User manual

Installation Instructions

• Suitable exclusively for 12V or 24V constant voltage LED systems
• For indoor use only (IP20) or use in protected, waterproof enclosures outdoors
• Install only when disconnected from the power supply
• Do not hot-plug – restart when connected to a load after making changes
• Ensure correct polarity and secure screw terminal connections
• Maintain a minimum distance of approx. 20 cm from heat sources or other power supplies for better heat dissipation
• Operate only in a dry, acid- and oil-free environment
• RF radio range may be affected by metal or strong signal sources
• Push-dimming possible via standard push buttons

Open data sheet
2 in 1 dimmable RF LED power supply 40W 12/24V

€27,90

What is an LED power supply?

An LED power supply (also known as an LED transformer or LED power source) converts the standard mains voltage of 230V into the direct current (usually 12V or 24V) required for LED strips. It is an essential component of any LED installation and must be selected to match the power and voltage of the LEDs.

What voltages are common for LED power supplies?

Common output voltages are:

5V: typical for addressable LED strips such as WS2812 or SK6812

12V: common for shorter distances and standard LED strips

24V: ideal for longer LED strips or applications with lower voltage drop

48V: designed for particularly long distances

How do I calculate the right power for my power supply?

The required power is determined by the total power of all connected LED strips in watts. You should also include a safety margin of approx. 10%.

Example:
An LED strip with 10 W/m, length 5m → 50W + 10% margin = at least 55W power supply capacity.

What types of LED power supplies are there?

  • Open power supplies (industrial form): for installation in enclosures with ventilation slots
  • Enclosed power supplies: protected, usually IP20 or higher.
    Variants with IP65 or IP67 even offer the option of installation in damp and outdoor areas
  • Plug-in power supplies: ideal for smaller LED projects, plug-and-play
  • DIN rail power supplies: for distribution in control cabinets

What does the IP protection rating mean for power supplies?

The IP protection rating indicates how well a power supply is protected against dust and moisture:

  • IP20: for dry indoor areas only
  • IP65 / IP67: for damp areas, outdoor use, or dusty environments

Can multiple LED strips be connected to one power supply?

Yes, as long as the total power of all strips does not overload the power supply and they are voltage-compatible.

Pay attention to:

  • sufficient cable cross-section
  • secure connections
  • additional feed points for longer distances

What happens if the power supply is too weak?

A power supply that is too weak can lead to flickering, color distortion, or even damage. The LEDs will no longer receive sufficient power – reliable operation cannot be guaranteed.

Can I use a power supply with too much power?

Yes, that is easily possible. LED strips only draw as much power as they need.

  • Advantage: more headroom, longer power supply lifespan
  • Disadvantage: excessive oversizing reduces efficiency and unnecessarily increases standby power consumption

How is an LED power supply connected?

  • Primary side (230V AC): L (Phase), N (Neutral conductor), PE (Protective earth, if present)
  • Secondary side (e.g. 12V DC): V+ and V–

⚠️ Important note: Connection to the 230V mains voltage must be carried out exclusively by a qualified electrician. Improper connection can lead to electric shocks, short circuits or fires.

Can I connect a power supply myself?

  • 230V connection: must only be carried out by a qualified electrician.
  • 12/24V side (low voltage): can generally also be connected by laypeople.
    ⚠️ Important note: Many power supplies have common terminal blocks where both the 230V input and the 12/24V outputs are located next to each other. For this reason, the wiring of such power supplies should always be carried out by a qualified electrician.

What is the difference between 12V and 24V power supplies?

  • 12V: Standard for many LED strips, suitable for shorter distances
  • 24V: Lower voltage drop, therefore better for longer distances

Additional complementary products

  • Free shipping on orders over €70
    *within Germany, excluding bulky goods; delivery times may vary
  • Satisfaction guaranteed or your money back
    You have the option to return the products within 30 days without giving any reason.
  • Questions or comments?
    Just contact us via our contact page or by email
  • Secure payment
    PayPal, Klarna, credit card, Apple Pay, invoice (for business customers), and many more