No products found.

Use fewer filters or clear filters.


What are addressable / digital LED strips?

Addressable LED strips – also known as digital, pixel, or smart LED strips – allow individual LEDs or groups of LEDs to be controlled independently. This makes it possible to create effects such as color gradients, chasing lights, or animations, where the LEDs are controlled independently of one another.

Technically, these strips operate using integrated microcontroller chips (e.g., WS2812B, SK6812, WS2815) that process digital control signals. This allows creative lighting installations to be programmed or controlled in real time.

What is the difference compared to classic RGB strips?

With classic RGB strips, all LEDs light up simultaneously in the same color. With addressable strips, each LED can individually change its color and brightness. This enables dynamic effects that are not possible with normal RGB strips.

Which controllers are compatible?

Digital LED strips require special controllers that support the respective protocol (e.g., suitable for WS2812, SK6812, UCS1903). Popular options are pre-programmed controllers, DIY solutions with WLED (ESP32), Arduino or Raspberry Pi, as well as professional DMX controllers with a digital output.

What does SPI mean for LED strips?

SPI stands for "Serial Peripheral Interface" – a digital communication protocol. SPI LED strips require a data signal (DI) and, if applicable, a clock signal (CLK) to precisely control the LEDs. It is used with many types of addressable LEDs.

Are addressable LED strips also available in RGBW or a single color?

Yes. Models such as the SK6812 RGBW include a dedicated white channel in addition to the RGB spectrum. This enables richer white light and better color mixing—ideal for applications that also require neutral- or warm-white light. Single-color versions are also available. It is important that the controller is designed for the respective colors.

How long can digital LED strips be?

The maximum possible length depends primarily on the input voltage and the number of LEDs per meter. While the data signal can easily be extended over several meters with many LED types (e.g., WS2812, SK6812), the power supply must be planned individually. Depending on the voltage and current consumption, multiple power injection points should be provided—especially with low voltage (5V) and high LED density. For very long installations, a signal amplifier may also be required to stabilize the data signal.

How are these strips connected?

A typical connection consists of +V (e.g. 5 V or 12 V), GND (ground), DATA IN (data signal) and, if applicable, CLK (for chips with a separate clock line). Important: The controller and strip must use the same protocol and voltage.

For which applications are addressable strips particularly suitable?

  • Effect lighting
  • Commercial applications
  • Stair and furniture lighting with chasing light effects
  • Advertising signs and animated light panels
  • Gaming and PC modding
  • Lighting in vehicles or smart homes
  • Stage, trade show and event technology

What should be considered regarding the power supply?

Addressable LED strips can require a lot of power depending on the number of LEDs. Therefore, appropriately sized power supplies and stable injection points are essential. When selecting the power supply, it is recommended to factor in a 10% tolerance for the maximum power of your installation